Project Description

  • fushun a312 tp304 stainless steel tube pipe

Commitment to You

We are committed to integrate steel resources in china and serve the global steel market. We have 15+ years of experience in steel researching, production, managing and sales.

Our ability to purchase materials directly from leading mills will give you the competitive edge. Any Questions Just Call +86-731-89903933

ASTM A312 TP304 Austenitic Stainless Steel Pipe

ASTM A312 / A312M seamless, straight-seam welded, and cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. Several grades of steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, chromium, nickel, molybdenum, titanium, columbium, tantalum, nitrogen, vanadium, copper, cerium, boron, aluminum, and others. All pipes shall be furnished in the heat-treated condition in accordance with the required heat treating temperature and cooling/testing requirements. Tensile properties of the material shall conform to the prescribed tensile strength and yield strength. The steel pipe shall undergo mechanical tests such as transverse or longitudinal tension test and flattening test. Grain size determination and weld decay tests shall be performed. Each pipe shall also be subjected to the nondestructive electric test or the hydrostatic test.

ASTM A312 Stainless Pipe Manufacturer

We are professional ASTM A312 stainless Pipe manufacture & supplier, having capability to produce wide range size steel Pipe for heat exchanger system, manufacturing process starts from extrusion of billet, by cold rolling and cold drawn methods to control size and tolerance, heat treatment will be finished after cold working to achieve original steel properties, which improve high temperature resistance and corrosion resistance, then Pipes should be under pickling passivation condition.

ASTM A312 TP304 Stainless Pipe Chemical Composition % Max

Grade C Mn P S Si Cr Ni
TP304 0.08 2 0.045 0.03 1 18.0-20.0 8.0-11.0

ASTM A312 TP304 Stainless Pipe Mechanical Properties

Material Heat Treatment Temperure Min.  F(C) Tensile Strength Ksi (MPa), Min. Yield Strength Ksi (MPa), Min. Elongation %, Min
TP304 Solution 1900 (1040) 75(515) 30(205) 35

ASTM A312 TP304 Stainless Pipe Lengths

  1. Unless otherwise agreed upon,all sizes from NPS 1/8 to and including NPS 8 are available in a length up to 24 ft with the permitted range of 15 to 24 ft.Short lengths are acceptable and the number and minimum length shall be agreed upon between the manufacturer and the purchaser.
  2. If definite cut lengths are desired,the lengths required shall be specified in the order.No pipe shall be under the specified length and no pipe shall be more than /4 in.[6 mm]over the specified length.
  3. No jointers are permitted unless otherwise specified.

ASTM A312 TP304 Stainless Pipe Testing Requirement

Each Pipe shall be subjected to the nondestructive electric test or hydrostatic test, Manufacturer Material Test Certification as per EN 10204 3.1 should be provided.

  • Tensile property, Elogation
  • Hardness testing, Brinell, Rockwell, Vickers hardness
  • Flattening testing
  • Flaring testing
  • Hydrostatic or Nondestructive test
  • Intergranular Corrosion Test – ASTM A262/E (option)

ASTM A312 TP304 Stainless Pipe Marking

In addition to the marking specified in Specification A999/A999M,the marking shall include the NPS(nominal pipe size)or outside diameter and schedule number or average wall thickness,heat number,and NH when hydrotesting is not performed and ET when eddy-current testing is performed or UT when ultrasonic testing is performed.The marking shall also include the manufacturer’s private identifying mark,the marking requirement,if applicable,and whether

seamless(SML),welded(WLD),or heavily cold-worked (HCW).For Grades TP304H, TP316H, TP321H, TP347H, TP348H, and S30815,the marking shall also include the heat number and heat-treatment lot identification.If specified in the purchase order,the marking for pipe larger than NPS 4 shall include the weight.

 

ASTM A312 TP304 Stainless Pipe Packing
A312 Seamless Pipes is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation.
A312 Steel Seamless Pipes packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage. Delivery: Within 10-25 days or asap if we have enough stock

Experienced 15+ Years

Our ability to purchase materials directly from leading mills at the best possible price will give you the competitive edge. This coupled with a skilled workforce dedicated to embracing the demands of the markets.

We Can Supply Follows Products with High Quality:

  1. Cold Rolled Steel Tube
  2. Cold Drawn Steel Tube
  3. Hollow Bar
  4. Honed Tube
  5. Plated Tube
  6. Plated Bar
  7. Boiler Tube

All Products According Quality Standard Strictly:

  1. ASTM: ASTM A519, ASTM A513.
  2. JIS:JIS G3441, JIS G3445, JIS G3466, JIS G3459.
  3. DIN: DIN1626, DIN1629, DIN2391, DIN2393, DIN2448, DIN2458.
  4. EN: EN10305.
  5. BS: BS6323.

Wide Range of Pipes to Fit Your Industry:

  1. OD from 5mm to 820mm.
  2. Wall Thickness from 0.1 to 100mm.
  3. Length up to 50mtr per pc.

    Your Name *

    Your Email *

    Company Name

    Phone Number *

    Further Information

    Can’t Find What You Looking for? Check Popular Items Blew.

    Direct from the Source and Deliver to You in a Very Fast and Efficient Timeframe.