<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Chrome Plated Tube: Piston Rod, f7, 20-30 um | Fushun Metal</title>
	<atom:link href="https://www.fushunsteeltube.com/product-category/plated-tube/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.fushunsteeltube.com</link>
	<description></description>
	<lastBuildDate>Wed, 18 Nov 2026 01:53:58 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.0.8</generator>
	<item>
		<title>Chrome Plated Tube</title>
		<link>https://www.fushunsteeltube.com/product-item/chrome-plated-tube/</link>
		
		<dc:creator><![CDATA[admin]]></dc:creator>
		<pubDate>Sun, 21 Feb 2021 06:19:09 +0000</pubDate>
				<guid isPermaLink="false">https://www.fushunsteeltube.com/?post_type=avada_portfolio&#038;p=13471</guid>

					<description><![CDATA[Chrome plated steel tubing are produced from Drawn over Mandrel (DOM) tubing in carbon steel. The outside diameter is centerless ground, polished, and chrome plated to a thickness.]]></description>
										<content:encoded><![CDATA[<figure class="fs-hero"><img decoding="async" src="/wp-content/uploads/2021/02/Chrome-Plated-OD-Tubing-2.jpg" alt="Hard chrome plated steel tube for hydraulic piston rods, OD 10 to 300 mm, ground and polished surface" width="680" height="454" loading="eager" fetchpriority="high" /></figure>
<div class="fs-spec">
<div><b>10 – 300 mm</b><span>outside diameter</span></div>
<div><b>3 – 30 mm</b><span>wall thickness</span></div>
<div><b>20 µm ±10%</b><span>chrome layer</span></div>
<div><b>f8</b><span>OD accuracy</span></div>
<div><b>Ra 0.2 – 0.4 µm</b><span>OD roughness</span></div>
<div><b>H7 – H9</b><span>ID accuracy</span></div>
</div>
<div class="fs-trust">
<span><b>MOQ</b> 500 kg per size</span><br />
<span><b>Lead time</b> 25–35 days</span><br />
<span><b>Base tube</b> DOM, +SR</span><br />
<span><b>Quote</b> within 24 hours</span><br />
<span><b>Salt spray</b> tested per batch</span>
</div>
<div class="fs-qbar">
<span class="t"><b>Specifying a piston rod?</b> Send OD, ID, length and chrome thickness — quotation back within 24 hours.</span><br />
<a href="#quote">Get a quote</a><br />
<a class="wa" href="https://wa.me/8617873581838" rel="nofollow noopener" target="_blank">WhatsApp</a>
</div>
<p class="fs-lead">A chrome plated tube is a hydraulic piston rod before it becomes one. The base is drawn-over-mandrel tube in carbon steel, stress relieved; the outside diameter is centerless ground and polished, then hard chrome plated to 20 µm and polished again. That sequence produces three things a plain tube cannot: an f8 diameter that will seal against a rod gland, a surface at Ra 0.2–0.4 µm that carries a wiper without leaking, and a chromium layer of roughly 900 HV that resists abrasion and corrosion in the rod&#8217;s working stroke. The bore is separately ground to H7–H9 when the tube is also used as a cylinder barrel. We supply 10 to 300 mm OD, 3 to 30 mm wall, 1 to 12 m length, plated without hexavalent chromium, with salt spray results per batch.</p>
<h2>Full specification</h2>
<p class="fs-cap">Table 1 — Supply specification</p>
<div class="fs-scroll">
<table class="fs-tbl">
<thead>
<tr>
<th>Parameter</th>
<th>Value</th>
<th>Why it is specified that way</th>
</tr>
</thead>
<tbody>
<tr>
<td>Outside diameter</td>
<td>10 – 300 mm</td>
<td>Covers rod sizes from small bore cylinders to large press rams</td>
</tr>
<tr>
<td>Wall thickness</td>
<td>3 – 30 mm</td>
<td>Wall carries the buckling and tensile load, not the chrome</td>
</tr>
<tr>
<td>Length</td>
<td>1 – 12 m</td>
<td>Cut to stroke length plus gland allowance on order</td>
</tr>
<tr>
<td>OD accuracy</td>
<td>f8</td>
<td>The shaft tolerance that fits an H8/H9 gland bore with a running clearance</td>
</tr>
<tr>
<td>OD roughness</td>
<td>Ra 0.2 – 0.4 µm</td>
<td>Too rough wears the seal; too smooth will not hold an oil film</td>
</tr>
<tr>
<td>Hard chrome thickness</td>
<td>20 µm ±10%</td>
<td>Standard hydraulic layer; thicker for aggressive environments</td>
</tr>
<tr>
<td>ID accuracy</td>
<td>H7, H8, H9</td>
<td>On request, when the bore is a functional surface</td>
</tr>
<tr>
<td>ID roughness</td>
<td>Ra 0.2 – 0.8 µm</td>
<td>On request, honed or skived</td>
</tr>
<tr>
<td>Delivery condition</td>
<td>+SR, stress relieved</td>
<td>Prevents movement when the rod is machined or welded after plating</td>
</tr>
</tbody>
</table>
</div>
<h2>Base material</h2>
<p class="fs-cap">Table 2 — Grades we run</p>
<div class="fs-scroll">
<table class="fs-tbl">
<thead>
<tr>
<th>Grade</th>
<th>Standard</th>
<th>Typical use</th>
</tr>
</thead>
<tbody>
<tr>
<td>STKM 13C</td>
<td>JIS G3445</td>
<td>General hydraulic rod; the most common grade in Asian supply chains</td>
</tr>
<tr>
<td>STKM 13A</td>
<td>JIS G3445</td>
<td>Lower strength variant for lighter rods</td>
</tr>
<tr>
<td>ST52.3 BK+S</td>
<td>DIN 2391 / EN 10305-1</td>
<td>Higher strength, European drawings; the E355 equivalent</td>
</tr>
<tr>
<td>SAE 1026</td>
<td>ASTM A519</td>
<td>US drawings, good hardenability for induction hardening after plating</td>
</tr>
<tr>
<td>SAE A106</td>
<td>ASTM A106</td>
<td>Where the buyer&#8217;s drawing names it; heavier wall rods</td>
</tr>
</tbody>
</table>
</div>
<p class="fs-note">The base grade decides what happens if the rod is later induction hardened. A 1026 or ST52.3 rod hardens predictably; a low-carbon STKM 13A does not. If the drawing calls for a hardened case under the chrome, say so at enquiry — the plating sequence changes.</p>
<h2>Surface and chrome layer</h2>
<p class="fs-cap">Table 3 — What the surface actually gives you</p>
<div class="fs-scroll">
<table class="fs-tbl">
<thead>
<tr>
<th>Property</th>
<th>Value</th>
<th>Consequence in service</th>
</tr>
</thead>
<tbody>
<tr>
<td>Chrome hardness</td>
<td>Roughly 900 HV (about 68 HRC equivalent at the surface)</td>
<td>Resists abrasion from dust and metal particles drawn past the wiper</td>
</tr>
<tr>
<td>Layer thickness</td>
<td>20 µm ±10%</td>
<td>Thick enough to survive regrinding once; thin enough not to crack under bending</td>
</tr>
<tr>
<td>Porosity</td>
<td>Micro-cracked, as deposited</td>
<td>Holds oil, which is why it seals well; the cracks must not reach the base metal</td>
</tr>
<tr>
<td>Corrosion resistance</td>
<td>Salt spray tested per batch</td>
<td>The chrome is a barrier, not a sacrificial coating — a through-crack pits the steel underneath</td>
</tr>
<tr>
<td>Process chemistry</td>
<td>Trivalent chrome, no hexavalent chromium</td>
<td>Required for REACH and RoHS compliance in European supply chains</td>
</tr>
<tr>
<td>Post-plate finish</td>
<td>Polished to Ra 0.2 – 0.4 µm</td>
<td>Determines seal life more than the chrome thickness does</td>
</tr>
</tbody>
</table>
</div>
<h2>Chrome plated tube, chrome plated bar or induction hardened</h2>
<p class="fs-cap">Table 4 — Choosing the rod product</p>
<div class="fs-scroll">
<table class="fs-tbl">
<thead>
<tr>
<th>Product</th>
<th>Construction</th>
<th>Use it when</th>
<th>Limitation</th>
</tr>
</thead>
<tbody>
<tr>
<td>Chrome plated tube</td>
<td>Hollow, DOM base</td>
<td>The rod is long and weight matters; the bore may also be used as a passage</td>
<td>Buckling limit lower than a solid bar at the same diameter</td>
</tr>
<tr>
<td>Chrome plated bar</td>
<td>Solid, typically Ck45</td>
<td>Short strokes, high side load, or the rod end needs to be machined solid</td>
<td>Heavier and more expensive per metre</td>
</tr>
<tr>
<td>Induction hardened + chrome</td>
<td>Tube or bar, case hardened under the chrome</td>
<td>High side load, abrasive environment, or where denting would end the seal</td>
<td>Cannot be straightened after hardening; more process steps</td>
</tr>
<tr>
<td>Stainless rod</td>
<td>Martensitic or duplex</td>
<td>Marine, offshore and food environments</td>
<td>Two to three times the cost; lower surface hardness than hard chrome</td>
</tr>
</tbody>
</table>
</div>
<h2>Inspection</h2>
<p class="fs-cap">Table 5 — What is checked before it ships</p>
<div class="fs-scroll">
<table class="fs-tbl">
<thead>
<tr>
<th>Check</th>
<th>Coverage</th>
<th>Method</th>
</tr>
</thead>
<tbody>
<tr>
<td>Chrome thickness</td>
<td>Every batch, samples per lot</td>
<td>Magnetic induction gauge or coulometric</td>
</tr>
<tr>
<td>Surface hardness</td>
<td>Samples per lot</td>
<td>Microhardness on a polished section</td>
</tr>
<tr>
<td>OD dimension</td>
<td>100%</td>
<td>Micrometer, f8 verified against the drawing</td>
</tr>
<tr>
<td>Roundness and straightness</td>
<td>100%</td>
<td>V-block and dial indicator</td>
</tr>
<tr>
<td>Surface defect</td>
<td>100% visual</td>
<td>Look for pitting, nodules, polishing marks and edge burns</td>
</tr>
<tr>
<td>Salt spray</td>
<td>Per batch</td>
<td>Neutral salt spray; hours recorded on the report</td>
</tr>
<tr>
<td>Base tube certificate</td>
<td>Every lot</td>
<td>EN 10204 3.1 for the tube, plus a plating report</td>
</tr>
</tbody>
</table>
</div>
<h2>Where chrome plated tube goes</h2>
<div class="fs-grid">
<div class="fs-card">
<h3>Hydraulic cylinder rods</h3>
<p>The main application. The rod is the only part of the cylinder exposed to the environment on every stroke, so the chrome layer and the surface finish decide the seal life.</p>
</div>
<div class="fs-card">
<h3>Telescopic cylinders</h3>
<p>Multi-stage rods where each stage is a different diameter and every stage is chromed. Straightness matters more here than in a single-stage cylinder.</p>
</div>
<div class="fs-card">
<h3>Elevator and lift cylinders</h3>
<p>Long strokes and outdoor duty. Usually a heavier chrome layer and a higher wall for buckling.</p>
</div>
<div class="fs-card">
<h3>Agricultural machinery</h3>
<p>Dust, mud and stone chips. This is where a through-crack in the chrome becomes a pitted rod within a season.</p>
</div>
<div class="fs-card">
<h3>Earthmoving equipment</h3>
<p>High side load on the rod, so induction hardened tube under the chrome is often the right specification rather than plain chrome plated.</p>
</div>
<div class="fs-card">
<h3>Press and forming rams</h3>
<p>Large diameters, 200 mm and above, where the tube route saves weight against a solid bar.</p>
</div>
</div>
<h2>Frequently asked questions</h2>
<div class="fs-faq">
<h3>Why chrome plated tube rather than stainless steel?</h3>
<p>Cost and surface hardness. Hard chrome runs at roughly 900 HV against 250–300 HV for a martensitic stainless rod, and the base tube is a fraction of the price. Stainless wins only where chloride attack would pit the chrome through to the steel — marine and offshore duty.</p>
<h3>What does f8 mean in practice?</h3>
<p>It is an ISO shaft tolerance: the rod is never larger than nominal and undersize by a defined band that grows with diameter. Paired with an H8 or H9 gland bore it gives a running fit with a controlled clearance, which is what the seal needs.</p>
<h3>How thick should the chrome be?</h3>
<p>20 µm is the hydraulic standard and what we hold as default. Go to 30–50 µm for abrasive or corrosive environments, and expect to grind back to size — a thick layer builds up on the diameter and must be removed.</p>
<h3>Is the chrome hexavalent?</h3>
<p>No. We plate from trivalent chromium baths, which is what REACH and RoHS require for anything entering the European market. If your drawing still specifies hexavalent chrome, the drawing needs updating.</p>
<h3>Can you hone the inside as well?</h3>
<p>Yes, to H7–H9 with Ra 0.2–0.8 µm. This is common for telescopic stages where the bore of one stage is the running surface for the next, and it has to be ordered explicitly — the default is an as-drawn bore.</p>
<h3>Can a worn rod be re-plated?</h3>
<p>Yes, if the base metal is sound. The old chrome is stripped, the diameter is ground undersize, re-plated and re-polished. A rod pitted through to the steel cannot be saved by plating — the pit is still there under the new layer.</p>
<h3>What length can you supply?</h3>
<p>1 to 12 m. Longer rods are made as butt-welded assemblies, which is a different product with its own weld qualification — ask before assuming a 15 m rod can be shipped in one piece.</p>
<h3>What is the minimum order and lead time?</h3>
<p>500 kg per size. Lead time is 25–35 days including plating; induction hardened and honed-bore variants add about a week.</p>
</div>
<div class="fs-cta">
<b>Send the rod drawing.</b> OD, ID, stroke length, chrome thickness and whether the bore is functional — that is enough for a firm price. If the surface finish or the base grade will not survive your duty, we will say so before you order.<br />
<a class="fs-btn" href="#quote">Request a quote</a><br />
<a class="fs-wabtn" href="https://wa.me/8617873581838" rel="nofollow noopener" target="_blank">WhatsApp</a>
</div>
<h2>Related products</h2>
<div class="fs-prod">
<a href="/product-item/cold-drawn-seamless-cds-steel-tube/">Cold Drawn Seamless Tube<span>The base tube, EN 10305-1 E235 / E355</span></a><br />
<a href="/product-item/din-2391-seamless-precision-steel-tube/">DIN 2391 Precision Tube<span>St35 / St45 / St52, tight tolerance</span></a><br />
<a href="/product-item/10305-1-cold-drawn-seamless-steel-tube/">EN 10305-1 Cold Drawn Tube<span>h9–h11, +SR and +N conditions</span></a><br />
<a href="/product-item/aisi-4140-seamless-alloy-steel-tube/">AISI 4140 Alloy Tube<span>For hardened rods and shafts</span></a><br />
<a href="/product-item/20cr13-stainless-steel-seamless-tube/">20Cr13 Stainless Tube<span>Martensitic alternative for corrosive duty</span></a><br />
<a href="/product-item/e470-20mnv6-high-tensile-low-alloy-steel-hollow-bar/">E470 20MnV6 Hollow Bar<span>Thick wall rod stock</span></a>
</div>
<p><a href="/our-products/cold-drawn-steel-tube/">All cold drawn tube — CDS, honed, skived and plated</a> · <a href="/cold-drawn-seamless-tube-guide/">Guide: cold drawn seamless tube, tolerance classes and delivery conditions</a></p>
<h2 id="quote">Request a quotation</h2>
<p>Tell us OD, ID, length, chrome thickness and the base grade if the drawing names one. We reply within 24 hours with price, lead time and the inspection scope.</p>
[contact-form-7]
<p><script type="application/ld+json">
{"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"https://www.fushunsteeltube.com/product-item/chrome-plated-tube/#product","name":"Chrome Plated Tube for Hydraulic Piston Rods","description":"Hard chrome plated steel tube for hydraulic piston rods and cylinder barrels: OD 10 to 300 mm, wall 3 to 30 mm, length 1 to 12 m, OD accuracy f8, surface roughness Ra 0.2 to 0.4 micrometre, hard chrome layer 20 micrometre plus or minus 10 percent, ID H7 to H9 on request, trivalent chrome process, DOM base tube stress relieved.","image":["https://www.fushunsteeltube.com/wp-content/uploads/2021/02/Chrome-Plated-OD-Tubing-2.jpg"],"brand":{"@type":"Brand","name":"Fushun Metal"},"manufacturer":{"@type":"Organization","name":"Hunan Fushun Metal Co., Ltd."},"material":["STKM 13C","STKM 13A","ST52.3 BK+S","SAE 1026"],"category":"Chrome Plated Steel Tube","additionalProperty":[{"@type":"PropertyValue","name":"Size range","value":"OD 10 to 300 mm, wall 3 to 30 mm"},{"@type":"PropertyValue","name":"Length","value":"1 to 12 m"},{"@type":"PropertyValue","name":"OD tolerance","value":"f8"},{"@type":"PropertyValue","name":"Chrome thickness","value":"20 micrometre plus or minus 10 percent"},{"@type":"PropertyValue","name":"Surface roughness","value":"Ra 0.2 to 0.4 micrometre"},{"@type":"PropertyValue","name":"Delivery condition","value":"+SR stress relieved"}],"offers":{"@type":"Offer","url":"https://www.fushunsteeltube.com/product-item/chrome-plated-tube/","availability":"https://schema.org/InStock","priceCurrency":"USD","seller":{"@type":"Organization","name":"Hunan Fushun Metal Co., Ltd."}}},{"@type":"FAQPage","@id":"https://www.fushunsteeltube.com/product-item/chrome-plated-tube/#faq","mainEntity":[{"@type":"Question","name":"Why use chrome plated tube rather than stainless steel for a piston rod?","acceptedAnswer":{"@type":"Answer","text":"Cost and surface hardness. Hard chrome runs at roughly 900 HV against 250 to 300 HV for a martensitic stainless rod, and the base tube costs a fraction of stainless. Stainless wins only where chloride attack would pit the chrome through to the steel."}},{"@type":"Question","name":"What does f8 tolerance mean on a chrome plated rod?","acceptedAnswer":{"@type":"Answer","text":"F8 is an ISO shaft tolerance: the rod is never larger than nominal and undersize by a defined band that grows with diameter. Paired with an H8 or H9 gland bore it gives a running fit with controlled clearance, which is what the seal needs."}},{"@type":"Question","name":"How thick should the hard chrome layer be?","acceptedAnswer":{"@type":"Answer","text":"20 micrometre is the hydraulic standard and the default. Use 30 to 50 micrometre for abrasive or corrosive environments, bearing in mind the layer builds up on the diameter and must be ground back to size."}},{"@type":"Question","name":"Is the chrome hexavalent?","acceptedAnswer":{"@type":"Answer","text":"No. Plating is from trivalent chromium baths, which is what REACH and RoHS require for anything entering the European market. A drawing still specifying hexavalent chrome needs updating."}},{"@type":"Question","name":"Can the inside diameter be honed as well?","acceptedAnswer":{"@type":"Answer","text":"Yes, to H7 to H9 with Ra 0.2 to 0.8 micrometre. This is common for telescopic stages where the bore of one stage is the running surface for the next, and it must be ordered explicitly because the default is an as-drawn bore."}},{"@type":"Question","name":"Can a worn chrome plated rod be re-plated?","acceptedAnswer":{"@type":"Answer","text":"Yes if the base metal is sound. The old chrome is stripped, the diameter ground undersize, re-plated and re-polished. A rod pitted through to the steel cannot be saved, because the pit remains under the new layer."}},{"@type":"Question","name":"What is the maximum length of chrome plated tube?","acceptedAnswer":{"@type":"Answer","text":"1 to 12 m. Longer rods are made as butt welded assemblies, which is a different product with its own weld qualification and should be confirmed before assuming a 15 m rod can ship in one piece."}},{"@type":"Question","name":"What is the minimum order and lead time for chrome plated tube?","acceptedAnswer":{"@type":"Answer","text":"500 kg per size. Lead time is 25 to 35 days including plating; induction hardened and honed bore variants add about a week."}}]}]}
</script></p><p>The post <a href="https://www.fushunsteeltube.com/product-item/chrome-plated-tube/">Chrome Plated Tube</a> first appeared on <a href="https://www.fushunsteeltube.com">Fushun Metal</a>.</p>]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
