Project Description

Commitment to You

We are committed to integrate steel resources in china and serve the global steel market. We have 15+ years of experience in steel researching, production, managing and sales.

Our ability to purchase materials directly from leading mills will give you the competitive edge. Any Questions Just Call +86-731-89903933

P235GH 1.0345 EN10216 Seamless EN10217 Welded Round Steel Tube For Pressure Purposes

We are leading Manufacturer, Supplier & Exporter of high quality EN 10216-2 Alloy Steel Seamless Pipes. These are manufactured in conformance with the international quality standards. These are used in varied engineering applications as well as in high temperature pipelines, boiler tubes and other areas. We offer these seamless pipes in different size, grades, thickness & Specification demanded by the clients. These pipes are used in various application industry like petrochemical, engineering, chemical, oil and gas and other industrial etc. We also offer our clients in competitive prices in the market.

This EN 10216 specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section,with specified elevated temperature properties,made of non-alloy and alloy steel. NOTE This Part of EN 10216 may also be applied for tubes of non-circular cross section;necessary modification should be agreed a the time of enquiry and order.

Supply Size:

Outsider diameter: 10-600mm

Wall Thickness: 1-80mm

Standard:

BS EN 10216 Seamless steel tubes for pressure purposes — Technical delivery conditions
Part2: Non-alloy and alloy steel tubes with specified elevated temperature properties

EN 10217-2: 2002 Welded steel tubes for pressure purposes. Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties

EN 10216-2 Seamless Steel Tube Chemical component

Steel name Steel number C Si Mn P max S max Cr Mo Ni Al Cu Nb Ti max V Cr+Cu+Mo+Ni Others
P235GH 1.0345 ≤0.16 ≤0.35 ≤1.20 0.025 0.020 ≤0.30 ≤0.080 ≤0.30 ≥0.020 ≤0.30 ≤0.010 0.040 ≤0.02 ≤0.70 –

EN 10216-2 Seamless Steel Tube Heat Treatment

Steel grade Steel number Heat treatment Austenizing Temperature °C Cooling Medium Tempering Temperature °C Cooling medium
P235GH 1.0345 +N 880 to 940 Air – –

+N = Normalising, . Normalising includes Normalising Forming.

EN 10216-2 Seamless Steel Tube Mechanical Property

Steel name Steel number Tensile properties at room temperature Tensile Strength MPa Elongation A min.% Impact properties  Minimum avornge absorbed energy KV J
T≤16 16<T≤40 40<T≤60 60<T≤100 l t
MPa MPa MPa MPa I t 20 0 -10 20 0
P235GH 1.0345 235 225 215 – 360 to 500 25 23 – 40 28 – 27

EN 10216-2 Seamless Steel Tube Minimum proof strength at elevated temperature

Steel name Steel number Wall thickness mm Minimum proof strength MPa at temperature of ℃
100 150 200 250 300 350 400 450 500 550 600
P235GH 1.0345 ≤60 198 187 170 150 132 120 112 10B – – –

INFORMATION TO BE SUPPLIED BY THE PURCHASER

Mandatory information: The following information shall be supplied by the purchaser at the time of enquiry and order:

a)the quantity(mass or total length or number);

  1. b) the term “tube”;

c)the dimensions(outside diameter D and wall thickness T or a set of dimensions covered by Option 11)

d)the designation of the steel grade in accordance with this Part of EN 10216;

  1. e) the test category for non-alloy steel.

EN 10216-2 Seamless Steel Tube manufacture and delivery conditions

All NDT activities shall be carried out by qualified and competent level 1,2 and/or 3 personnel authorised to operate by the employer. The qualification shall be in accordance with EN 10256 or,at least,an equivalent to it. It is recommended that the level 3 personnel be certified in accordance with EN 473 or,at least,an equivalent to it. The operating authorisation issued by the employer shall be in accordance with a written procedure. NDT operations shall be authorised by level 3 NDT individual approved by the employer. NOTE The definition of level 1,2 and 3 can be found in appropriate Standards,e.g.EN 473 and pr EN 10256. The tubes shall be manufactured by a seamless process. Unless option 1 is specified,the tubes may be either hot or cold finished at the discretion of the manufacturer. The terms-hot finished”and”cold finished”apply to the condition of the tube before it is heat treated. Option 1:The tubes shall be cold finished before heat treatment. The tubes shall be supplied in the relevant heat treatment conditions as specified.

EN 10216-2 Seamless Steel Tube Appearance

The tubes shall be free from external and internal surface defects that can be detected by visual examination.The internal and external surface finish of the tubes shall be typical of the manufacturing process and, where applicable, the heat treatment employed. Normally the finish and surface condition shall be such that any surface imperfections requiring dressing can be identified. It shall be permissible to dress, only by grinding or machining, surface imperfections provided that, after doing so, the wall thickness in the dressed area is not less than the specified minimum wall thickness. All dressed areas shall blend smoothly into the contour of the tube. Any surface imperfection, which is demonstrated to be deeper than 5 % of the wall thickness T or 3 mm whichever is the smaller, shall be dressed. This requirement does not apply to surface imperfection with a depth equal or less 0,3 mm. Surface imperfections which encroach on the specified minimum wall thickness shall be considered defects and tubes containing these shall be deemed not to conform to this Part of EN 10216.

EN 10216-2 Seamless Steel Tube Internal soundness

Leak Tightness: The tubes shall pass a hydrostatic test or electromagnetic test for leak-tightness. Unless option 7 is specified, the choice of the test method is at the discretion of the manufacturer. Option 7: The test method for verification of leak-lightness in accordance with 11.8.1 or 11.8.2 is specified by the purchaser.

Non-Destructive Testing: The tubes of test category 2 shall be subjected to a non-destructive testing for the detection of longitudinal imperfections. Option 8: The tubes of test category 2 shall subjected to a non-destructive testing for the detection of transverse imperfections in accordance. Option 9: The Tubes of test category 2 shall be subjected to a non-destructive testing for the detection of the laminar imperfections in accordance .

EN 10216-2 Seamless Steel Tube Straightness

The deviation from straightness of any tube length L shall not exceed 0,0015 L. Deviations from straightness over any one metre length shall not exceed 3 mm.

EN 10216-2 Seamless Steel Tube Mandatory inspection and tests

  • Cast analysis
  • Tensile test at room temperature
  • Flattening test
  • Ring tensile test
  • Drift expanding test
  • Ring expanding test
  • Impact test
  • Leak tightness test
  • Dimensional inspection
  • Visual examination
  • NOT for the detection of longitudinal imperfections
  • Material identification of alloy steels

EN 10216-2 Seamless Steel Tube Optional inspection and tests

  • Product analysis
  • Tensile test al elevated temperature
  • Impact test
  • Longitudinal impact test
  • Wall thickness measurementaway from tube ends
  • NDT for the detection of transverse imperfections
  • NDT for the detection oflaminar imperfections

Experienced 15+ Years

Our ability to purchase materials directly from leading mills at the best possible price will give you the competitive edge. This coupled with a skilled workforce dedicated to embracing the demands of the markets.

We Can Supply Follows Products with High Quality:

  1. Cold Rolled Steel Tube
  2. Cold Drawn Steel Tube
  3. Hollow Bar
  4. Honed Tube
  5. Plated Tube
  6. Plated Bar
  7. Boiler Tube

All Products According Quality Standard Strictly:

  1. ASTM: ASTM A519, ASTM A513.
  2. JIS:JIS G3441, JIS G3445, JIS G3466, JIS G3459.
  3. DIN: DIN1626, DIN1629, DIN2391, DIN2393, DIN2448, DIN2458.
  4. EN: EN10305.
  5. BS: BS6323.

Wide Range of Pipes to Fit Your Industry:

  1. OD from 5mm to 820mm.
  2. Wall Thickness from 0.1 to 100mm.
  3. Length up to 50mtr per pc.

    Your Name *

    Your Email *

    Company Name

    Phone Number *

    Further Information

    Can’t Find What You Looking for? Check Popular Items Blew.

    Direct from the Source and Deliver to You in a Very Fast and Efficient Timeframe.