Project Description

Low and Medium Pressure Boiler Tubes — Hunan Fushun Metal

Low and Medium Pressure Boiler Tubes

Product Description

Low and medium pressure boiler tubes refer to seamless steel tubes used in low-pressure boilers (with pressure ≤2.5MPa) and medium-pressure boilers (with pressure ≤3.9MPa). These tubes can be used to manufacture superheated steam tubes, boiling water tubes, water-cooled wall tubes, flue tubes, and arch brick tubes for low and medium pressure boilers. They are typically made from high-quality carbon structural steel using hot-rolled or cold-rolled processes, such as grades 10 and 20.

Main Grades or Steel Grades of the Product

  • Grades 10, 20.

Standards Implemented for the Product

  • GB/T 3087-2008.

Product Features

  • Comprehensive specifications and steel types, excellent performance. Capable of producing thick-walled tubes with a wall-to-diameter ratio up to 36%, and thin-walled tubes with a wall-to-diameter ratio below 4%. Utilizes mature piercing technology, unique cold-working techniques, advanced lubrication processes, and stable and reliable heat treatment technologies to ensure consistent product quality.

Specification Range:

  • Outer Diameter: Φ16mm ~ Φ219mm; Wall Thickness: 2.0mm ~ 40.0mm.

Low and medium pressure boiler tube data

These tubes sit on the low-pressure side of the boiler: water walls, flue tubes, arch tubes and boiling tubes where the design pressure stays at or below 2.5 MPa (low) or 3.9 MPa (medium). Because the duty is modest, the buying decision usually turns on wall uniformity and bendability rather than on creep data.

Standard GB/T 3087-2008 — seamless steel tubes for low and medium pressure boilers
Grades 10, 20
Outside diameter 16 mm – 219 mm
Wall thickness 2.0 mm – 40.0 mm
Length 4 – 12 m random, cut to order
Delivery condition Hot-rolled or cold-drawn; normalized on request
Testing Hydrostatic test, flattening, flaring; tensile per heat
Certificate EN 10204 3.1 mill certificate

Wall-to-diameter ratio runs from about 4 % on thin-wall water wall tubes to 36 % on thick-wall headers, so the same grade can be quoted in very different rolling routes. Send OD, wall, length and the bending or expanding operation that follows, and we will confirm whether hot-rolled or cold-drawn tube suits it.

Related products

Further reading