Project Description

ASTM High-Pressure Boiler Tubes — Hunan Fushun Metal

ASTM High-Pressure Boiler Tubes

Product Description

High-pressure boiler tubes are primarily used in supercritical or ultra-supercritical boilers for components such as superheaters, reheaters, water walls, and economizers. These tubes require high long-term strength, excellent anti-oxidation and corrosion resistance, as well as good structural stability.

Common Grades or Steel Grades of American Standard High-Pressure Boiler Tubes

Common grades include:

  • SA-179M
  • SA-192M
  • SA-209M T1a
  • SA-210M Gr.C
  • SA-210M Gr.A1
  • SA-213M T11
  • SA-213M T12
  • SA-213M T22
  • SA-213M T23
  • SA-213M T91

Standards

  • SA-179/SA-179M: Seamless Cold-Drawn Low-Carbon Steel Tubes for Heat Exchangers and Condensers
  • SA-192/SA-192M: Seamless Carbon Steel Boiler Tubes for High Pressure Use
  • SA-209/SA-209M: Seamless Carbon-Molybdenum Alloy Steel Boiler and Superheater Tubes
  • SA-210/SA-210M: Seamless Medium-Carbon Steel Boiler and Superheater Tubes
  • SA-213/SA-213M: Seamless Ferritic and Austenitic Alloy Steel Boiler, Superheater, and Heat Exchanger Tubes

Product Features

High-pressure boiler tubes often operate under high temperature and pressure conditions. The tubes can experience oxidation and corrosion under the influence of high-temperature flue gas and steam. Therefore, high-pressure boiler steel tubes must have high long-term strength, excellent anti-oxidation and corrosion resistance, and good structural stability.

Size Range

Outer Diameter: ∮15.88~89mm; Wall Thickness: 2.6~12.5mm

ASTM high-pressure boiler tube data

Grade selection follows metal temperature rather than pressure. Carbon grades (SA-179, SA-192, SA-210) cover the economiser and lower water wall; 1.25Cr and 2.25Cr grades (T11, T12, T22) take the superheater through the creep range; T23 and T91 are the step change for main steam above roughly 565 °C.

Standards ASME SA-179M, SA-192M, SA-209M, SA-210M, SA-213M
Grades SA-179, SA-192, SA-209 T1a, SA-210 A1, SA-210 C, SA-213 T11, T12, T22, T23, T91
Outside diameter 15.88 mm – 89 mm
Wall thickness 2.6 mm – 12.5 mm
Length 6 – 12 m random, cut to order
Delivery condition As-rolled or normalized for carbon grades; normalized and tempered for T23 / T91
Testing Hydrostatic, eddy current, ultrasonic; flattening and tensile per heat
Certificate EN 10204 3.1 mill certificate; 3.2 on request

For T23 and T91 the heat treatment is part of the specification, not a finishing option: both are supplied normalized and tempered, with hardness checked on every tube. Say so on the enquiry if the tube will be bent after delivery, because bend tests and post-bend heat treatment have to be agreed before rolling.

Related products

Further reading