News

Home/News
News2021-04-16T08:28:34+00:00

Welding of low-temperature steel pipes (A333-6) in LPG projects

Welding of low-temperature steel pipes (A333-6) in LPG projects In liquefied projects, pipelines generally use low-temperature pipes (A333-6). The process for welding this material is complex, and there is limited experience with welding these steel pipes domestically. To ensure the quality of welding for this material, we need to select welding materials based on its characteristics, establish welding procedures, and [...]

By |September 25th, 2024|Categories: BLOG|Comments Off on Welding of low-temperature steel pipes (A333-6) in LPG projects

Classification of Pipeline Levels

Classification of Pipeline Levels 1. Overview In current Chinese regulations, industrial pipeline classifications can be divided into two systems. One is the classification system for pressure pipelines, involving regulations such as the Safety Technical Supervision Regulations for Pressure Pipelines – Industrial Pipelines TSG D0001-2009 and the Rules for Licensing Design of Pressure Vessels and Pressure Pipelines TSG R1001-2008. The other [...]

By |September 25th, 2024|Categories: BLOG|Comments Off on Classification of Pipeline Levels

Design Points of Cryogenic Pipelines

Design Points of Cryogenic Pipelines Abstract: In petrochemical enterprises, cryogenic pipelines are frequently used. Generally speaking, pipelines conveying materials below +5°C are referred to as cryogenic pipelines. However, in practice, low-carbon steel can be normally used within the range of +5°C to -20°C, as the steel is mainly in a ductile state under these conditions. When the temperature drops below [...]

By |September 25th, 2024|Categories: BLOG|Comments Off on Design Points of Cryogenic Pipelines

Low Temperature Pressure Vessels

Low Temperature Pressure Vessels Currently, there are no specific standards for low temperature pressure vessels in our country. JB4732 does not differentiate between low temperature and normal temperature boundaries. ★ For low temperature shell-and-tube heat exchangers, see Appendix A of GB151-1999. ★ For low temperature pressure vessels, see Appendix E of GB150.3-2011 (in the old version GB150 it was Appendix [...]

By |September 25th, 2024|Categories: BLOG|Comments Off on Low Temperature Pressure Vessels

Tubing Definition and Knowledge

Tubing Definition and Knowledge Tubing is a hollow section with no welds from end to end. Steel pipes, which have hollow sections, are extensively used for conveying fluids such as oil, natural gas, gas, water, and certain solid materials. Compared to solid steel bars like round steel, steel pipes with the same bending and torsional strength are lighter in weight, [...]

By |September 25th, 2024|Categories: BLOG|Comments Off on Tubing Definition and Knowledge

Discussion on the Heat Treatment Process of 12Cr1MoV Steel for High-Pressure Steam Pipes

Discussion on the Heat Treatment Process of 12Cr1MoV Steel for High-Pressure Steam Pipes   Abstract: The high-pressure steam pipes of steam turbines are an essential component of the entire unit, and the selection of tubing material and heat treatment processes directly impact the service life of the entire unit. Our factory uses 12Cr1MoV material for high-pressure steam pipes based on [...]

By |September 24th, 2024|Categories: BLOG|Comments Off on Discussion on the Heat Treatment Process of 12Cr1MoV Steel for High-Pressure Steam Pipes
Go to Top