Project Description

High Pressure Feedwater Heater U-Tube Boiler Tubes — Hunan Fushun Metal

High Pressure Feedwater Heater U-Tube Boiler Tubes

Product Description

To reduce the loss of heat carried away by cooling water in condensers, feedwater heating is implemented to minimize this loss. After the high-pressure feedwater pumps, high-pressure heaters are added to elevate the temperature of the boiler feedwater, improving economic efficiency and conserving coal resources. The heat exchanger tubes are a crucial component of these systems, available in various forms such as U-tubes, π-tubes (flat-bottomed tubes), and straight tubes.

In U-tube heat exchangers, each heat exchange tube is bent into a U-shape, with both ends fixed in two separate zones of the same tube sheet. The tube box is divided into inlet and outlet chambers by an internal baffle. This type of heat exchanger completely eliminates thermal stress and has a simpler structure compared to floating head types, although the tube side is not easy to clean.

Main Grades or Steel Levels

  • ASME SA-556C2
  • 20MnGJ

Standards for Products

  • ASME SA-556M: Seamless cold-drawn carbon steel tubes for feedwater heaters
  • GB/T 24591-2009: Seamless steel tubes for high-pressure feedwater heaters

Features of the Product

The tubes are long (up to over 35 meters in length) and thin (with a length-to-diameter ratio greater than 1000). Due to the requirements of production and usage environments for high-pressure heaters, they must meet high standards for straightness (full length passing through a ring gauge +0.02mm larger than the maximum outer diameter), surface roughness, and must be free from rust.

Usage Environment

The U-tubes used in high-pressure feedwater heaters operate at temperatures above 350°C. Depending on the size of the unit, they function under pressures of 30MPa or higher. The tubes also withstand high-speed water flow (over 3m/s) and vibrations, making the operating conditions harsh. Therefore, they require very high reliability, with a service life expectancy of over 15 years.

Specification Range of Products

  • Outer Diameter: Φ12mm ~ Φ25mm
  • Wall Thickness: 1.0mm ~ 4.0mm

Related products

Further reading