Project Description
HRSG Ultra-long Boiler Tubes
Product Description
In combined cycle power plants, HRSG (Heat Recovery Steam Generator) boilers recover waste heat from gas turbine exhaust gases to generate steam that drives a turbine for electricity generation. HRSG ultra-long tubes are essential components of these boilers. HRSG ultra-long tubes are drawn in single lengths long enough for a complete panel, so that the panel is bent without a mid-length weld. Wall thickness is held over the full length because the tube is bent and welded after delivery, and straightness is checked end to end rather than on a sample.
Main Grades of HRSG Tubes
- SA210A1
- SA210C
- SA192
- SA213-T11
- SA213-T12
- SA213-T22
- SA213-T91
- SA213-T92
- 20G
- 15CrMoG
- 12Cr1MoVG
- P235GH
- 13CrMo4-5
Specifications of HRSG Tubes:
- Outer Diameter (OD): 26~65mm
- Wall Thickness (WT): 2.4~7mm
Length of HRSG Tubes:
- Length: 16~26m (Customized lengths up to Lmax = 28m available)
Standards (Partial List):
- GB5310-2008: Seamless steel tubes for high-pressure boilers
- ASME SA210: Seamless medium carbon steel tubing for boilers and superheaters
- ASME SA192: Seamless carbon steel boiler tubing for high-pressure applications
- ASME SA213: Seamless ferritic and austenitic alloy steel tubing for boilers, superheaters, and heat exchangers
- EN10216-2: Technical delivery conditions for seamless steel tubes for pressure purposes
HRSG ultra-long tube data
HRSG evaporator and superheater panels are bent from a single tube length wherever possible, because every mid-panel weld is a future inspection point. That is what drives the specification: length first, then straightness, then ovality at the ends where the bends start.
| Grades | SA210A1, SA210C, SA192, SA213 T11, T12, T22, T91, T92; 20G, 15CrMoG, 12Cr1MoVG; P235GH, 13CrMo4-5 |
| Outside diameter | 26 mm – 65 mm |
| Wall thickness | 2.4 mm – 7.0 mm |
| Length | 16 – 26 m as standard; up to 28 m on confirmation |
| Delivery condition | As-rolled, normalized, or normalized and tempered by grade |
| Ends | Plain or bevelled to the customer drawing |
| Testing | Hydrostatic, eddy current, ultrasonic; dimensional and straightness check over the full length |
| Packing | Hexagonal bundles or wooden cradles, end caps fitted, bundle weight to site lifting limit |
| Certificate | EN 10204 3.1; 3.2 on request |
Long tube is a transport problem as much as a rolling problem. Tell us the port of discharge and the maximum bundle weight the site crane can take, and the tubes will be bundled and lashed to that limit rather than to a standard 20 ft container payload.
