Project Description
ASTM High-Pressure Boiler Tubes
Product Description
High-pressure boiler tubes are primarily used in supercritical or ultra-supercritical boilers for components such as superheaters, reheaters, water walls, and economizers. These tubes require high long-term strength, excellent anti-oxidation and corrosion resistance, as well as good structural stability.
Common Grades or Steel Grades of American Standard High-Pressure Boiler Tubes
Common grades include:
- SA-179M
- SA-192M
- SA-209M T1a
- SA-210M Gr.C
- SA-210M Gr.A1
- SA-213M T11
- SA-213M T12
- SA-213M T22
- SA-213M T23
- SA-213M T91
Standards
- SA-179/SA-179M: Seamless Cold-Drawn Low-Carbon Steel Tubes for Heat Exchangers and Condensers
- SA-192/SA-192M: Seamless Carbon Steel Boiler Tubes for High Pressure Use
- SA-209/SA-209M: Seamless Carbon-Molybdenum Alloy Steel Boiler and Superheater Tubes
- SA-210/SA-210M: Seamless Medium-Carbon Steel Boiler and Superheater Tubes
- SA-213/SA-213M: Seamless Ferritic and Austenitic Alloy Steel Boiler, Superheater, and Heat Exchanger Tubes
Product Features
High-pressure boiler tubes often operate under high temperature and pressure conditions. The tubes can experience oxidation and corrosion under the influence of high-temperature flue gas and steam. Therefore, high-pressure boiler steel tubes must have high long-term strength, excellent anti-oxidation and corrosion resistance, and good structural stability.
Size Range
Outer Diameter: ∮15.88~89mm; Wall Thickness: 2.6~12.5mm
ASTM high-pressure boiler tube data
Grade selection follows metal temperature rather than pressure. Carbon grades (SA-179, SA-192, SA-210) cover the economiser and lower water wall; 1.25Cr and 2.25Cr grades (T11, T12, T22) take the superheater through the creep range; T23 and T91 are the step change for main steam above roughly 565 °C.
| Standards | ASME SA-179M, SA-192M, SA-209M, SA-210M, SA-213M |
| Grades | SA-179, SA-192, SA-209 T1a, SA-210 A1, SA-210 C, SA-213 T11, T12, T22, T23, T91 |
| Outside diameter | 15.88 mm – 89 mm |
| Wall thickness | 2.6 mm – 12.5 mm |
| Length | 6 – 12 m random, cut to order |
| Delivery condition | As-rolled or normalized for carbon grades; normalized and tempered for T23 / T91 |
| Testing | Hydrostatic, eddy current, ultrasonic; flattening and tensile per heat |
| Certificate | EN 10204 3.1 mill certificate; 3.2 on request |
For T23 and T91 the heat treatment is part of the specification, not a finishing option: both are supplied normalized and tempered, with hardness checked on every tube. Say so on the enquiry if the tube will be bent after delivery, because bend tests and post-bend heat treatment have to be agreed before rolling.
