Project Description

GB5310 High-Pressure Boiler Tubes — Hunan Fushun Metal

GB5310 High-Pressure Boiler Tubes

Product Description

High-pressure boiler tubes operate under high temperature and pressure conditions. Under the influence of high-temperature flue gas and steam, the tubes can experience oxidation and corrosion. Therefore, these tubes require high long-term strength, excellent anti-oxidation and corrosion resistance, as well as good structural stability. High-pressure boiler tubes are primarily used in supercritical or ultra-supercritical boilers for components such as superheaters, reheaters, water walls, and economizers.

Production Details

Our products are comprehensive in steel grades and exhibit superior performance. We can produce both thick-walled tubes with a wall-to-diameter ratio up to 36% and thin-walled tubes with a wall-to-diameter ratio below 4%.

Manufacturing Process

Our production processes include mature piercing technology, unique cold working techniques, advanced lubrication processes, and stable heat treatment technologies. These overcome the challenges posed by the ultra-supercritical environment characterized by high temperatures, pressures, and steam corrosion, contributing significantly to shortening the construction period of power plants and promoting further cost reduction and efficiency improvements in the power industry.

Applications

Our products supply both domestic and international top-tier boiler manufacturers and have been successfully applied in power projects worldwide.

Steel Grades/Materials

  • 20G
  • SA210A1
  • SA210C
  • 15CrMoG
  • 12Cr1MoVG
  • R102

Standards (Partial)

  • GB5310-2008

Product Specifications Range

Outer Diameter: Φ16mm ~ Φ219mm; Wall Thickness: 2.0mm ~ 40.0mm.

GB 5310 high-pressure boiler tube data

GB 5310 is the Chinese pressure-part standard that runs alongside ASME SA-210 / SA-213, and the grade designations map onto each other closely enough that buyers often quote both: 20G against SA210A1, 15CrMoG against T12, 12Cr1MoVG against T22. Where the boiler is a Chinese design, the GB designation on the certificate is what the inspector will look for.

Standard GB 5310-2008 — seamless steel tubes for high-pressure boilers
Grades 20G, SA210A1, SA210C, 15CrMoG, 12Cr1MoVG, R102
Outside diameter 16 mm – 219 mm
Wall thickness 2.0 mm – 40.0 mm
Length 4 – 12 m random, cut to order
Delivery condition As-rolled or normalized; normalized and tempered for 12Cr1MoVG and R102
Testing Hydrostatic, eddy current, ultrasonic; tensile, yield and elongation per heat
Certificate EN 10204 3.1 mill certificate

Wall-to-diameter ratio is the hidden variable: the same 219 mm OD is a routine water wall tube at 8 mm wall and a different rolling route at 40 mm. Send the ratio rather than the OD alone and the mill route, price and lead time can be confirmed together.

Related products

Further reading