Project Description

Stainless Steel Sanitary Piping — Hunan Fushun Metal

Stainless Steel Sanitary Piping

Stainless steel sanitary pipes are primarily used in food, beverage, wine, and biological engineering equipment and production lines. They focus on surface finish, oil-free treatment, and passivation layer requirements.

Surface Finish:

  • Polished Surface:The interior and exterior surfaces of the pipes are polished to achieve a bright, mirror-like finish, preventing substances flowing through the pipe from adhering to the walls and potentially causing blockages over time.

Passivation Layer:

  • Passivation Treatment:After polishing, the pipes are immersed in a passivation bath, where an acidic solution forms a passivation layer on the surface, enhancing corrosion resistance.

Oil-Free Treatment:

  • Oil Removal:Following passivation, the pipes are cleaned to remove any surface oils. This process is verified using an oil analysis instrument to ensure that the pipe does not contaminate the substances it carries.

Advantages:

  • Superior Hygiene:The polished surface and oil-free treatment maintain high levels of cleanliness, reducing the risk of contamination.
  • Durability:The passivation layer enhances corrosion resistance, prolonging the life of the pipes.
  • Customization:Special sizes can be customized upon request to meet specific project requirements.

Applications:

  • Food Industry:Ideal for use in food processing plants and equipment.
  • Beverage Industry:Suitable for beverage production lines and equipment.
  • Biological Engineering:Appropriate for use in biotechnology and pharmaceutical industries.

Contact Us:

For further information, custom orders, or technical inquiries, please contact us. We are committed to providing top-quality products and exceptional service to meet your specific needs.

Stainless Steel Sanitary Piping: Your reliable choice for hygienic, durable, and high-performance piping solutions.

 

Sanitary tube data

Sanitary tube is judged on the inside surface, so the finish is a specification item rather than a description. Ra value, finish method and the acceptance instrument should all be on the order; a “polished” tube that measures Ra 1.2 µm will fail a dairy inspection even though it looks bright.

Standards ASTM A270, ASTM A312, ASME BPE (where the project calls for it)
Grades 304, 304L, 316, 316L
Size range 12.7 – 152.4 mm OD, 1.2 – 3.0 mm WT
Surface finish 2B, bright annealed, No. 4, 320 / 400 grit polish, electropolished
Internal roughness Ra ≤ 0.4 µm for electropolished; ≤ 0.8 µm for mechanical polish (confirm at order)
Treatment Polished, passivated, oil-free; oil residue checked before capping
Testing Hydrostatic or eddy current, flattening, reverse flattening; surface and passivation check
Certificate EN 10204 3.1; 3.2 on request

Tubes are supplied capped, sleeved and bagged, because a scratched bore is a rejection on arrival. Tell us the final fabrication step — orbital welding, tri-clamp ferrules, or bending — and the end preparation and straightness tolerance will be set to suit it.

Related products

More Stainless Steel Tube from Fushun Metal

Further reading