Project Description

Duplex Stainless Steel Seamless Pipes — Hunan Fushun Metal

Product Description:

Duplex Stainless Steel Seamless Pipes are advanced metallurgical products featuring a unique α+γ dual-phase microstructure. This composition combines the best properties of austenitic and ferritic stainless steels, resulting in an optimal balance of high strength and excellent corrosion resistance. Typically, these pipes contain 18-28% chromium and 3-10% nickel, with low carbon content. Some grades may also include alloying elements such as Mo, Cu, Nb, Ti, and N.

Key Grades:

S31803 / S32205, S32750, S32760, S31500, 32001, S32003, S32304

Key Standards:

– ASTM A789 (ASME SA789): Seamless and welded ferritic/austenitic stainless steel tubing for general service
– ASTM A790 (ASME SA790): Seamless and welded ferritic/austenitic stainless steel pipe
– ASTM A928 (ASME SA928): Ferritic/austenitic (duplex) stainless steel pipe electric fusion welded with addition of filler metal
– GB/T 21832-2008: Austenitic-ferritic duplex stainless steel welded pipes
– GB/T 21833-2008: Austenitic-ferritic duplex stainless steel seamless pipes

Key Features:

1. Superior Corrosion Resistance: Excellent resistance to general and localized corrosion, particularly stress corrosion cracking, pitting, crevice corrosion, corrosion fatigue, and erosion corrosion.
2. Excellent Weldability: Maintains structural integrity and corrosion resistance in welded joints.
3. Outstanding Mechanical Properties: High strength combined with good ductility and toughness.
4. Improved Intergranular Corrosion Resistance: Better performance in aggressive environments compared to many other stainless steels.
5. High Cost-Effectiveness: Long service life and reduced material requirements due to high strength.

Advantages over Ferritic Stainless Steel:

– Higher plasticity and toughness
– No room temperature brittleness
– Significantly improved intergranular corrosion resistance and weldability
– Retains high thermal conductivity and superplasticity of ferritic grades

Advantages over Austenitic Stainless Steel:

– Significantly higher yield strength
– Improved resistance to intergranular corrosion, stress corrosion, corrosion fatigue, and erosion

Applications:

Duplex Stainless Steel Seamless Pipes are ideal for applications requiring a combination of high strength and excellent corrosion resistance, such as:
– Oil and gas industry
– Chemical processing plants
– Pulp and paper mills
– Desalination plants
– Marine environments
– Heat exchangers in corrosive environments

These pipes offer a superior balance of properties, making them an excellent choice for demanding applications where traditional stainless steels may fall short.

Duplex stainless tube data

Duplex is ordered by grade plus a microstructure requirement, not by grade alone. The 50/50 austenite-ferrite balance and the absence of sigma phase are what the corrosion resistance depends on, and both are set by the solution anneal and quench rather than by chemistry.

Grades S31803 / S32205 (2205), S32304 (2304), S31500, S32750 (2507), S32760 (Zeron 100), S32003
Standards ASTM A789 / ASME SA789 (tubing), A790 / SA790 (pipe), A928 (welded pipe with filler)
PREN 2205 ≈ 34; 2304 ≈ 24; 2507 ≈ 42; S32760 ≈ 41
Typical size range 6 – 610 mm OD, 0.8 – 40 mm WT
Delivery condition Solution annealed and water quenched
Testing Hydrostatic, PMI, ferrite content and intermetallic phase per ASTM A923 where specified
Certificate EN 10204 3.1; 3.2 on request

ASTM A923 Method A / B / C is the usual way to prove that the quench was done properly. If the tube is for wet sour service, add NACE MR0175 / ISO 15156 hardness limits to the enquiry — the acceptance limits differ between 2205 and 2507.

Related products

More Stainless Steel Tube from Fushun Metal

Further reading